Talk:Rage

From SmashWiki, the Super Smash Bros. wiki
Jump to navigationJump to search

Rage's Origins?

In MARIO & LUIGI RPG 3: BOWSER'S INSIDE STORY (notable for being the most critically acclaimed RPG MARIO game and the first game to feature Bowser Koopa as the main protagonist), there was a special status unique to the Great Demon King called "Fury" that was similar to SMASH BROS. for Wii U's Rage in both function and appearance: Bowser becomes stronger while flashing red and emitting steam from his body. Both states also activate under the same circumstances: when the character takes a considerable amount of damage. Could Rage actually be Fury from the Great Demon King's first starring game or is it all just a mere coincidence? Either way, the resemblance is quite uncanny. 72.50.82.3 —Preceding unsigned comment added by 72.50.82.3 (talkcontribs) 10:08, 11 January 2015‎ (EST)

It's an idea that a whole bunch of games have, it has no clear origin. Toomai Glittershine ??? The Eggster 10:51, 11 January 2015 (EST)
I'm quite aware of that, but you must remember that Nintendo likes to fill their games with references (for nostalgic purpose), and with SMASH BROS. being a crossover of their franchises, we shouldn't automatically rule out the possibility that MARIO & LUIGI 3 could be the source for Rage.107.72.164.75

Which is true?

"...maxes out at 200% damage. At maximum rage, attacks will deal 2.0x the amount of knockback that would normally be dealt."
"The multiplier increases by one tenth every 10%, until it caps out at 2.0."

These two lines are not synonymous with each other. The first line implies that the knockback multiplier is 1+0.1(200)/10, equal to 3.0. May someone please address this? Chilex (talk) 03:26, 17 June 2015 (EDT)

Bump. Chilex (talk) 13:41, 21 June 2015 (EDT)

What I read is that the first is saying it maxes out at 200% damage with a 2.0x amount of knockback, and the multiplier increases by one tenth (0.1) every 10% damage until it reaches 2.0x, which theoretically would be at 200%. Seems synonymous to me. But I suck at math. ---Preceding unsigned comment added by you. Or maybe Nutta. 13:55, 21 June 2015 (EDT)
The default multiplier (by definition) is 1.0x. It goes up a step (0.1x) every 10%. At 200%, twenty steps have been made, so the multiplier has gone up by 2.0x. 2+1=3, so at 200%, the second line implies that the multiplier is 3.0x, not 2.0x. Chilex (talk) 14:00, 21 June 2015 (EDT)
...hmmm yeah. Idk which one is true then. ---Preceding unsigned comment added by you. Or maybe Nutta. 14:02, 21 June 2015 (EDT)
I just tested it with two Marios on Omega Battlefield, using a slightly charged, forward-facing Down Smash on a 100% Mario target at the center of the stage. Results:
  • No rage, 1.0x Launch Rate: Halfway between camera edge and platform.
  • 200% rage, 1.0x Launch Rate: Just offscreen.
  • No rage, 2.0x Launch Rate: KO! (a fast one at that)
  • No rage, 1.2x Launch Rate: Just offscreen. Roughly same as 200% rage and 1.0x launch rate.
I want to conclude that both statements in the article are false because of this, but I would like to see more extensive research (please link me to some if there is already). What it appears to be is "at maxiumum rage of 200%, attacks deal 1.2x the knockback dealt normally." b2jammer (talk) 20:40, 9 July 2015 (EDT)
I undid the edit so that it shows the values that I added to the article. The values added by the previous user contradict each other in a mathematical standpoint. Even if you assume that the rage multiplier begins at 0%, which is impossible, then the highest that the rage multiplier could ever be would be 1.9 because it was stated that it starts increasing at 10% damage. Those values were likely made up, and a value of 2.0 for a knockback multiplier would be incredibly high and make many attacks KO extremely early. It was already known that the rage multiplier stops increasing at 150% or a value very close to that, anyways. LimitCrown (talk) 04:41, 31 July 2015 (EDT)
Wouldn't it makes sense for it to start at 50% and have a multiplier increase of 0.02 every 10%? This would mean that:
  • 0-49% has a 1.0x launch rate
  • 50-59% has a 1.02x launch rate
  • 60-69% has a 1.04x launch rate
  • 70-79% has a 1.06x launch rate
  • 80-89% has a 1.08x launch rate
  • 90-99% has a 1.1x launch rate
  • 100-109% has a 1.12x launch rate
  • 110-119% has a 1.14x launch rate
  • 120-129% has a 1.16x launch rate
  • 130-139% has a 1.18x launch rate
  • 140-149% has a 1.2x launch rate
(Note: I haven't actually tested this, this is just a theory, and anyone is free to test this)
ANaCled (talk) 05:49, 7 December 2015 (EST)
That kind of pattern (a hard increase per a large amount of small "buckets") is almost unheard of in the series overall in terms of "mechanics that look at current damage". Far more likely is a straight linear formula with upper and lower limits. Toomai Glittershine ??? The Superlative 10:06, 7 December 2015 (EST)
I did an experiment to test my theory. For any of those curious:
  • The character hitting was Falcon, and I changed his percentage using the handicap function (And Fox's staled laser, for those awkward percents).
  • The character being hit was Kirby, and, using handicap, I set his percentage to 30%.
  • The stage was a wide, flat stage to prevent Kirby from dying from the hit.
  • I moved Kirby towards the left side of the stage, rolled into the edge, then rolled away from the edge once (This was to ensure that I was in the same position each time).
  • I moved Falcon towards the same side, and rolled into the edge (This was in case there were any sweet/sour spots in the move).
  • I flicked the smash stick forward, and left the controller controlling Kirby alone (No D.I).
  • I left the Kirby controller alone until he stood up on his own, then killed Falcon, and saved a replay.
  • I did each test in a new match each time, to prevent move reduction.
  • I did 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 and 200% at 1.0x launch rate, and 0% at both 1.1x and 1.2x launch rate.
  • I have the camera angle set to "Fixed", to see the change easier.
(I may have forgotten to type the other factors I kept the same, so if you think of anything I may have forgotten to add, ask me).
From what I could see:
  • Rage continued past 150%, as it looked like 200% sent him a fair distance compared to 150%.
  • 150% seemed to have a 1.1x multiplier.
  • The knockback difference was constant (didn't look like the rate of increase was changing).
I tried uploading the saves to YouTube, but it said that the data could not be sent (can you not upload replays on custom maps?). If I can find a way to download them, I'll try to analyse them.
ANaCled (talk) 16:58, 7 December 2015 (EST)