Diffusion Beam glitch

From SmashWiki, the Super Smash Bros. wiki
Revision as of 20:47, December 21, 2008 by 76.168.150.135 (talk) (→‎Trivia)
Jump to navigationJump to search
The Diffusion Beam Glitch

The Diffusion Beam Glitch is a glitch for R.O.B. in Super Smash Bros. Brawl. Like the Puff Up glitch this glitch works on any level where the terrain is regenerated, such as; the floor in Green Hill Zone, the awnings on Onett, etc. The most popular (and easiest) place to perform this glitch is on Bridge of Eldin. First R.O.B. must break the Smash Ball so you will be able to perfrom your Final Smash. Next thing you do (on the Bridge of Eldin) is you wait for King Bulblin to destroy the middle of the bridge. After a short wait a twilight portal will open and begin to rebuild the bridge, whilst this is happening jump into the space where the bridge will reappear and use R.O.B.'s Final Smash. If timed right R.O.B. will be launched into the air and land on the fixed bridge. Then R.O.B. should have a permanent Diffusion Beam. To end this glitch K.O. R.O.B.


Trivia

  • Interesting enough, Smash Balls will appear while the infinite diffusion beam is in use.
  • Diffusion Beam Has 3 modes: Wide, Short, and Laser. When The Glitched is performed your're stuck

in one of these three. However there is a remmedy. Simply charge a gyro and shield cancel it. R.O.B should randomly change his "mode". The laser is only fired once.

  • Sometimes, the diffusion beam wont appear, but the sound of it will keep going on.

External Links