Editing GameCube controller

[[File:GCCont.jpg|thumb|An indigo GameCube controller]]

The '''Nintendo GameCube controller''' is the [[controller]] for the [[Nintendo GameCube]]. It is somewhat in the vein of the [[Nintendo 64 controller]], but it lacks the middle grip. While having the same buttons as its predecessor, the GameCube controller moves the [[Z button]] onto the right shoulder as well as converts the [[C button]]s into a [[C-Stick]] for a much more ergonomic design where all buttons can be easily accessed.

The GameCube controller is the only controller compatible with ''[[Super Smash Bros. Melee]]'', as it was the default controller for the GameCube at the time of release.

Early models of the [[Wii]] are also compatible with the GameCube controller, meaning that ''[[Super Smash Bros. Brawl]]'' can be played using a GameCube controller, and the [[Virtual Console]] release of ''[[Super Smash Bros.]]'' can also be played using the GameCube controller. Certain third-party GameCube controllers are not recognized by ''Brawl''. The Wii Family Edition and Wii Mini do not utilize the GameCube controller as the hardware for backward compatibility was removed. The GameCube controller option still appears in-game, since it's compatible with the software, but only the Wii Remote-based options are possible. However, it is possible to solder GameCube controller ports into a family edition Wii as the tabs are still present.

The [[Wii U]] is compatible with the GameCube controller through the use of an official adapter, however, it is only compatible with {{forwiiu}}. The adapter uses a USB cable, which technically makes the GameCube controller compatible with other devices like PC, though specific drivers may have to be installed to work properly. Additionally, a GameCube controller was specifically made for ''SSB4'', which is sold separately from the adapter unless a bundle is purchased.

GameCube Controller support is also available for ''[[Super Smash Bros. Ultimate]]''. It requires the use of a USB Adapter in the same manner as ''Super Smash Bros. for Wii U''. Nintendo is also selling a new adapter along with new ''Ultimate'' themed GameCube controllers. Unlike the Wii U, the [[Nintendo Switch]] recognizes the GameCube controller as a [[Nintendo Switch Pro Controller]], and thus all games that support the Pro Controller unofficially support the GameCube controller by extension (rather than exclusively ''Super Smash Bros.'' series games). However, some games may not function well with the GameCube controller due to it lacking buttons and gyro functions other Switch-compatible controllers possess that may be required for gameplay purposes. Only a small number of games, such as ''Ultimate'' and the version of ''{{s|mariowiki|Super Mario Sunshine}}'' in ''{{s|mariowiki|Super Mario 3D All-Stars}}'' following an update, specifically detect it as a GameCube controller and map buttons accordingly.

 

In ''Brawl'', ''For Wii U'', and ''Ultimate'', the buttons on the GameCube controller can be remapped in the [[Controls]] menu to perform other functions. Although the GameCube controller is recognized as a Pro Controller, it cannot natively have custom button mapping via the system's settings as of Nintendo Switch hardware version 10.0.0.

 

In the case of the ''3DS'', it is impossible to natively use a GameCube controller. However, it is possible through modding, and can utilise a [[C-stick]] if used in this way, even on non-New 3DS.<ref>[https://youtu.be/0Fj6iIPR2iw?si=g6x8BFVLiTyVsOGT GameCube controller mod for 3DS]</ref> If played in this way, controls can be mapped, albeit only through a 3DS lens.

[[File:DefaultGameCubeSSBB.png|thumb|right|250px|GameCube controls menu in ''Brawl''.]]

[[File:DefaultGameCubeSSB4.jpg|thumb|right|250px|GameCube controls menu in ''For Wii U''.]]

[[File:DefaultGamecubeSSBU.png|thumb|right|250px|GameCube controls menu in ''Ultimate''.]]

!Control!!N64 equivalent!!Action

===Input lag===

GameCube controllers have the lowest latency of any Smash-related controller when used with ''Melee'' — albeit with high variance — experiencing lows of 44.25ms (2.5 frames) and highs of 75.91ms (4.5ms). If used in ''Brawl'', the latency increases to lows of 86.91ms (5.1 frames) and highs of 102.75 (6.1 frames). If used in ''Smash 4'' with the GameCube controller adapter, it experiences lows of 69.53ms (4.1 frames) and highs of 88.7ms (5.2 frames). When used with a GameCube controller adapter for ''Ultimate'', however, the latency drastically increases, roughly doubling compared to ''Melee''; it experiences lows of 87.86ms (5.1 frames) and highs of 109.53ms (6.5 frames).<ref>[https://www.polygon.com/2018/12/14/18140814/super-smash-bros-ultimate-input-lag-latency-feel Smash Controller Latency Article]</ref>

If a WaveBird wireless controller is used on the Channel 1 setting for ''Melee'', the latency amounts to lows of 53.11ms (3.1 frames) and highs of 78.78ms (4.5 frames), leaving it outclassed by a wired controller in terms of latency.<ref>[https://www.youtube.com/watch?v=OTPY9DWJ6Zo Latency video]</ref> If used in ''Brawl'', this drastically increases, reaching lows of 92.28ms (5.5 frames) and highs of 106.45ms (6.2 frames). If used with ''Smash 4'', the latency is a bit lower, being about the same as the [[Wii U GamePad]] in the lower end of the spectrum; it experiences lows of 71.2ms (4.1 frames) and highs of 92.86ms (5.5 frames).

[[File:Control_stick_angle_overview_(shield).png|thumb|upright=0.5|Overview of all value options during the shielding animation]]

The sliding potentiometers of the shoulder triggers use values from 0 to 255. Values from 0 to 73 have no in-game effect at all. In ''Melee'', values from 74 to 174 are inversely proportional to shield size. Values of 174 and higher produce the same shield size as digital presses, but only the digital press triggers techs and air dodges. In ''Brawl'', only the digital press has any in-game effects, as the game ignores the analog values entirely. However, in ''Smash 4'', the analog input is counted as a digital input, making the actual digital press of the shoulder buttons unnecessary.

The shape of the stick box prevents the value extremes from being achieved, and the octagonal shape on the outer shell of the controller further cuts down the effective input range to approximately 25-230. This range varies from controller to controller and decreases with use as the friction between the inner stick box parts creates a gap and thus a loose zone. Because of this, a worn-down control stick will push the potentiometer less than a fresh control stick.