- For the website, see hitbox.tv.
A hitbox or collision bubble (sometimes hitbubble) is the main structure for how attacks are executed in most fighting games. Attacks have one or more hitboxes associated with them, and when these hitboxes overlap with a target's damageable area (sometimes called their hurtbox or hurtbubbles), the attack is considered a hit. Hitboxes are invisible and usually, though not always, have the same shape as the attack's animation.
Overview
The two most common forms of hitbox shapes in video games are cuboids and spheres. Neither is obviously better than the other - cuboids can more easily form long or thin attacks or targets, while spheres are easier to calculate collision detection for. Smash 64 uses cuboids whereas Melee, Brawl, SSB4, and Ultimate use spheres and sphere-like structures known as capsules (cylinders with spheres on the ends).
In Smash 64, hacks can enable hitbox visibility (with a few limitations), such as in this image. In Melee, hitboxes can be seen by setting DBLEVEL to DEVELOP in the debug menu. There is no easy way to display hitboxes in-game in Brawl, SSB4 or Ultimate, though a common technique in Brawl is to use hacks to place Super Scope shot visuals where the hitboxes are (which is significantly more involved a process and generally fails for any projectile or item).
Should multiple hitboxes of a single move connect with the opponent, only one of them will count. The order of precedence is known as the "hitbox stack" - hitboxes higher in the stack will override ones lower should they both hit at the same time. Mechanically, this is denoted by giving each hitbox an ID number, and lower numbers indicate higher precedence (higher stack position). For example, Marth's down aerial in Melee features its tipper hitbox on top of the stack, so hitting with both a tipper and non-tipper hitbox will result in the tipper counting (even if the majority of the opponent was hit by the other hitboxes). By contrast, the move in Brawl has the tipper on the bottom, so the tipper can only hit if none of the other hitboxes do. As a result, even through the sizes and positions of the hitboxes did not change much between games, the tipper is simple to hit with in Melee while being difficult in Brawl.
Hitboxes that are separated from a character's hurtboxes are often called disjointed, which is usually an advantage, as they can connect from a farther distance, while keeping the attacker safer from retaliation and reducing the likelihood of trading blows. Examples of disjointed hitboxes include most weapon-based attacks, and more infamously the up tilts of Kirby in Smash 64 and Snake in Brawl as well as some of Joker's moves when using Arsene.
An interesting property of hitboxes in the Super Smash Bros. series is that under most conditions, they occupy not only the space where they currently are, but also the space where they were one frame ago as well as all the space in between (in a straight line, regardless of what the animation might look like during intervening subframes). This characteristic is likely to prevent situations where a fast projectile may end up passing through a character in less than a frame without hitting them. On the other hand, hurtboxes do not stretch over "interframe space" in this way, so a fast-moving object (such as Fox during his Illusion) may be able to move through a slow or stationary hitbox without being damaged. In addition, certain hitboxes in Brawl use the stretch effect to create a very long hitbox, for example in Zero Laser and Aura Storm, instead of stretching over interframe space. It is unclear how the hitbox-stretching mechanism operates in Brawl when time is slowed via training mode or other effects, as Brawl renders subframes, whereas Melee and SSB64 simply reduce the overall framerate.
Hitboxes in three dimensions
It is a common misconception that, like some other fighting games, hitboxes and hurtboxes only operate in two dimensions. In actuality, they interact in all three dimensions equally, even though the majority of gameplay elements are restricted to two-dimensional movement. As a result, Super Smash Bros. is more accurately described as a 2.5D game.
Notable examples of unexpected behavior due to the 3D nature of hitboxes include:
- Animations where characters lean sideways can result in attacks missing them. King Dedede's sidestep in Brawl is a notorious example, allowing him to dodge attacks with narrow hitboxes even after his intangibility ends.
- Attacks that swing in a horizontal arc can hit characters of different widths at different times. For example, Peach's neutral aerial in SSB4 usually hits Zero Suit Samus a frame later than most other characters. Similarly, Yoshi's running grab in Melee is so off to the side of the playing plane that it often misses a stationary Zelda completely.
When playing on a two-dimensional stage such as Flat Zone, many of these quirks disappear, due to characters being almost completely flattened along the camera's axis. However, some new quirks can arise: if hitboxes are produced when an arcing attack is normally not yet in the playable plane, the flattening effect results in them being able to hit earlier than expected. It is also important to note that only the characters are flattened; their hitboxes and hurtboxes continue to operate as three-dimensional objects in a three-dimensional world, so maneuvers such as using the Dragoon are not affected.
Players tend to refer to any unexpected behavior of this nature as fault of the "z-axis", as z traditionally refers to the third dimension in a three-dimensional environment. This tends to result in confusion when character moveset data is decoded, as while the camera's axis is indeed along the z-axis of stages, for characters and most other gameplay objects, the z-axis is the one that points forwards.
Hitbox types
| Hitbox Type | Debug mode Colour | Explanation |
|---|---|---|
| Offensive | Red | The standard type of attacking hitbox. From Brawl onward, there are various types of offensive hitboxes, some of which have unique abilities (like the ability to ignore shields). |
| Damageable | Yellow | The standard type of damageable area, also known as hurtboxes. Characters have a variety of these attached to their bodies, while damageable stage areas (such as the wedge of ice on the Summit) and non-playable entities (like enemies and bosses) use them as well. |
| Invincible | Green | Invincible targets can be hit by attacks but will not flinch or take any damage or knockback. For example, this occurs for characters that have just stepped off a revival platform, or who have used a Star. |
| Intangible | Blue | Intangible targets cannot be hit by attacks. This occurs during dodges and rolls. Various characters have attacks which provide parts of their body with intangibility, such as Mario's head during his up smash. |
| Reflective | Aqua | Defensive hitboxes that reflect attacks. |
| Shield | Cyan | Defensive hitboxes that shield attacks. |
| Absorbing | Cyan-blue | Defensive hitboxes that absorb attacks. |
| Grab | Magenta | Grab hitboxes will ignore any special or defensive hitboxes. |
| Inert | Grey | Inert hitboxes are used for collision detection when a regular hitbox is unsuitable (such as the dash of Raptor Boost and Gerudo Dragon). |
Hitbox properties
Normal properties
| Property | Introduced in | Description |
|---|---|---|
| ID | Smash 64 | The priority of the hitbox compared to the move's other hitboxes. If multiple hitboxes of an attack connect within the same frame, the hitbox with the lowest ID value registers the hit. This property is imperative to determine the precision and spacing for landing sweet spots; usually, hitboxes closer to the attacker have a lower ID (higher priority), regardless of whether they are sourspots or sweetspots. |
| Part | Smash 64 | Determines how many hitboxes can hit in one attack. If a hitbox has a part value of 1, for example, it can connect after landing a hitbox with a part value of 0. The vast majority of attacks use a part of 0 for all their hitboxes; instead, this property is reserved for certain multi-hit moves such as Marth's up smash in Brawl and Smash 4, to allow both the launcher (part 0) and sword hitboxes (part 1) to come out on the same frame and be considered multiple hits. However, a few oddities arise if hitboxes of different parts hit in the same frame:
|
| Bone | Smash 64 | The bone of a character model the hitbox is connected to. A value of 0 is a central bone and can only move with the character, while other values correspond to different bones of a character (such as an arm, leg, or in the case of swordfighters, a portion of the sword), and follow their movement even if the character themselves do not change position. Several attacks, particularly arcing swings, employ this property so their hitboxes can cover a wide area around the character without having to manually change their placement every frame; in later games, this is only done in specific cases to avoid blindspots. In Ultimate, character bones can have more descriptive names in hitbox scripts (such as "arml" or "legr"), with bone 0 being named "top". |
| Damage | Smash 64 | The base damage dealt by the hitbox. In the first three games, the initial damage is always an integer, but after Smash 64, it rarely ends up as one once modified by factors like stale-move negation. From Smash 4 onward, damage can be coded as any real number (using a single-precision floating-point format). |
| Angle | Smash 64 | The hitbox's launch trajectory, coded in degrees. Usually a number from 0 to 360, and can rarely be negative numbers such as -90. Depending on the game, values from 361 to 368 are reserved for special angles, such as the Sakurai angle (the default angle for horizontal-launching moves) or autolink angle. |
| Knockback scaling | Smash 64 | Also known as knockback growth. A factor in the knockback formula, generally determining the rate at which the hitbox's knockback rises as the target's damage increases, with the default being 100. For example, a value of 110 means knockback increases at a 1.1× rate compared to other hitboxes with the same damage and base knockback. |
| Fixed knockback value | Smash 64 | If not 0, causes the hitbox to deal a specific amount of knockback regardless of its damage or the target's, though it can still be modified by factors such as launch rate (prior to Smash 4) or weight. |
| Base knockback | Smash 64 | A factor in the knockback formula, generally determining the minimum knockback the hitbox can apply, though not being the only factor (the hitbox's damage and knockback scaling are relevant as well). |
| Size | Smash 64 | The hitbox's radius in units of distance. |
| X position | Smash 64 | The hitbox's horizontal displacement (in units of distance) relative to the bone it is attached to. In Smash 4 and Ultimate, for a bone of 0, this refers to the Z axis. |
| Y position | Smash 64 | The hitbox's vertical displacement (in units of distance) relative to the bone it is attached to. |
| Z position | Smash 64 | The hitbox's displacement in the foreground/background (in units of distance) relative to the bone it is attached to. In Smash 4 and Ultimate, for a bone of 0, this refers to the X axis. |
| Effect | Smash 64 | The hitbox's effect on hit, such as normal, slash, flame, or electric, among others. Can also be none. |
| Groundness/Airness | Smash 64 | Determines whether the hitbox can strike grounded opponents, aerial opponents, or both (or neither, but this is very rarely used). Attacks intended to have different behavior on grounded and aerial opponents (such as Samus' up tilt from Melee onward) generally use two hitboxes with the same placement, but differences in other properties as desired. In Ultimate, hitboxes can also be set to not connect against prone opponents, which is generally used for burying hitboxes. |
| Shield damage | Smash 64 | The hitbox's additional damage dealt to shields; usually 0, which means the hitbox deals regular damage to shields (excluding the multiplier of 0.7× in Melee/Brawl and 1.19× in Smash 4/Ultimate). Can also be a negative value to have hitboxes deal less damage to shields, though this is only used in Smash 64 and Ultimate. |
| Clang | Smash 64 | Determines whether the hitbox can cancel out other hitboxes through priority rules. In Smash 64, if a hitbox that cannot clang interacts with another hitbox, the move will clash, but its animation will continue, rather than going through the rebound animation. In later games, hitboxes that cannot clang simply cannot interact with other hitboxes. |
| Sound effect | Smash 64 | The hitbox's sound effect on impact (punch, kick, slash, burn, or shock, among others), including sounds unique to certain characters (such as Cloud's slash sounds). Can also be none. |
| Sound level | Smash 64 | The strength of the sound effect the hitbox produces on impact (small, medium, or large; huge can be applied for certain types). |
| Rebound | Melee | If set, prevents a grounded move from being interrupted if the hitbox clangs with another, disregarding priority rules. This essentially has the same effect as the clang property did in Smash 64, and is irrelevant if a hitbox cannot clang. In Ultimate, this is merged with the clang property, which is set as "THRU" (rather than "ON" or "OFF") to determine that a hitbox can clang but not rebound. In Brawl only, while this property is still present, it appears to be disabled altogether. |
| Trip chance | Brawl | The hitbox's bonus trip chance; for example, a value of 0.4 yields a 40% bonus trip chance. Can also be negative to disable the base trip chance, which is used for certain multi-hit moves such as Roy's up smash in Ultimate. |
| Hitlag multiplier | Brawl | Set to 1 by default. Modifies the duration of hitlag applied on impact to both the attacker (except for projectiles) and victim. |
| SDI multiplier | Brawl | Modifies the distance of smash directional influence for opponents struck by the hitbox. |
| Directness | Brawl | Determines whether the hitbox is indirect or not, which is used for enemy/sticker interactions in Brawl, and to determine a move's shieldstun from Smash 4 onward, among other effects. Not to be confused with a projectile. |
| Type | Brawl | Determines what kind of stickers (spirits in Ultimate) can power up the hitbox, such as arm, leg, body, or weapon, among others. |
Special properties
Prior to Ultimate some hitboxes are listed as "special hitboxes" which have additional properties. In Ultimate, these properties are included for every hitbox.
| Property | Introduced in | Description |
|---|---|---|
| Reflectiveness | Smash 64 | Determines whether the hitbox can be reflected. Usually a projectile. |
| Absorptiveness | Smash 64 | Determines whether the hitbox can be absorbed. Usually a projectile. |
| Blockability | Melee | Determines whether the hitbox can be shielded. In Ultimate, this property is merged with shield damage, which is listed as "no" if a hitbox is unblockable. |
| Flinchless | Melee | If set, prevents the hitbox from inflicting hitstun or hitlag; any knockback coded for the hitbox instead pushes or pulls opponents, which is commonly referred to as a windbox. |
| Hit bits | Brawl | Determines what a hitbox is capable of interacting with. This includes damageable stage objects (floors, ceilings, or other), multiple opponents, or even one opponent, as well as if it can connect against enemies from the Subspace Emissary in Brawl. Most attacks can hit all specified objects, but certain others, such as Mario's Fireballs, are set to ignore damageable floors so they cannot be stopped by Skyworld's breakable platforms, for example. |
| Rehit rate | Brawl | If not 0, allows the hitbox to strike again after the specified amount of frames. Commonly used for multi-hit moves in later games. |
| Heedless | Brawl | If set, allows the hitbox to hit teammates even if team attack is turned off. Rarely used. |
| Angle flipper | Brawl | Causes the hitbox to always launch opponents in the direction the user is facing, or the opposite, instead of depending on the attacker's position relative to the opponent. Used for various attacks such as forward tilts, forward smashes, forward aerials, and back aerials in Ultimate. Also used for Back Slash to determine which hitboxes connect depending on the direction opponents are hit from. |
| Piercing | Brawl | If set, allows the hitbox to ignore invincibility. Rarely used. |
| Disable hitlag | Brawl | If set, causes the hitbox to inflict no hitlag regardless of its hitlag multiplier. No longer used in Ultimate. |
| Stretch | Brawl | Determines if a hitbox is stretched out, rather than being spherical. This allows them to cover more space right away, but prevents them from interpolating per frame. |
| Disable GFX | Brawl | Determines if a hitbox produces hit graphics if it connects. Usually disabled for "conventional" windboxes, producing a visual difference between pushing attacks such as F.L.U.D.D. and Finishing Touch. |
| X stretch/X2 | Smash 4 | Determines how far a hitbox is stretched horizontally, with the same other properties as the standard X position. Alongside the other stretch coordinates, this is essentially an extension of the stretch property from Brawl, denoting both ends of the hitbox. |
| Y stretch/Y2 | Smash 4 | Determines how far a hitbox is stretched vertically, with the same other properties as the standard Y position. |
| Z stretch/Z2 | Smash 4 | Determines how far a hitbox is stretched in the foreground/background, with the same other properties as the standard Z position. |
| Set weight | Smash 4 | If set, the hitbox calculates knockback with a weight of 100 for all opponents, effectively ignoring weight differences. This was a hitbox related flag in Smash 4, but became a property in Ultimate. |
| Collision part | Ultimate | Determines what types of hurtboxes the hitbox can connect with (such as head, body, or legs). Used for Shield Breaker's effect of dealing more damage if it hits an opponent's head. |
Some other properties have been found, but their effect is currently unknown.
These are flags used in an animation's script in order to create, alter, or remove different types of hitboxes.
| Flag | Introduced in | Description |
|---|---|---|
| Hitbox | Smash 64 | Creates a hitbox. |
| Special hitbox | Smash 64 | Creates a special hitbox. |
| Change hitbox damage | Smash 64 | Changes the damage of a specific hitbox. |
| Change hitbox size | Smash 64 | Changes the size of a specific hitbox. |
| Remove hitbox | Smash 64 | Deletes a specific hitbox. |
| Remove all hitboxes | Smash 64 | Deletes all active hitboxes. |
| Check front | Melee | Prevents the hitbox from hitting opponents from behind. Only known to be used for Disable. |
| Grab collision | Brawl | Creates a grabbox. In Smash 64 and Melee, grabs used a normal hitbox with a grab effect. |
| Grab collision 2 | Brawl | Creates a special grabbox. Typically used for command grabs. |
| Remove grab collision | Brawl | Deletes a specific grabbox. |
| Remove all grab collisions | Brawl | Deletes all active grabboxes. |
| Inert collision | Brawl | Creates an inert collision. |
| Extended hitbox | Smash 4 | Creates a hitbox that can be stretched. |
| Extended special hitbox | Smash 4 | Creates a special hitbox that can be stretched. |
| Set falling speed | Smash 4 | Determines whether the hitbox considers the target's falling speed when knockback is calculated. Used only in Smash 4 for Finishing Touch and Meteor Trampoline. |
| Set gravity | Smash 4 | Determines whether the hitbox considers the target's gravity when knockback is calculated. Used only in Smash 4 for Finishing Touch and Meteor Trampoline. |
| Hitstun modifier | Ultimate | Changes the amount of hitstun the hitbox does when hitting an opponent. Due to a glitch, even if specified for certain hitboxes, it applies to all of a move's hitboxes until they are changed later in the script. |
| Shieldstun multiplier | Ultimate | Changes the amount of shieldstun the hitbox does to a shielding opponent. Due to a glitch, even if specified for certain hitboxes, it applies to all of a move's hitboxes until they are changed later in the script. |
| Critical hit | Ultimate | Causes only certain hitboxes of a move to produce a Special Zoom on hit. Used for moves such as Ganondorf's up tilt and a fully charged Wario Waft. |
| No finish camera | Ultimate | Prevents the hitbox from producing a Finish Zoom, even if it would launch opponents far enough to do so. Generally used as a failsafe for certain multi-hit moves' linking portions. |
| Disable tech | Ultimate | Prevents opponents from teching the hitbox's knockback. Currently only used for Cross Chop's falling portion and Onslaught's meteor smashing kick. A similar effect is present since Smash 4 for certain Final Smashes such as Pair Up, but not declared in hitbox scripts. |
Trapbox
In Melee, a trapbox is the hitbox left on the ground during Ness' yo-yo glitch. It is called a trapbox because this hitbox is not attached at all to any kind of attack but instead just sits wherever it was when the glitch occurred. Using a new attack will overwrite the hitbox with the new attack's properties and relocate it to the new attack, which due to the interframe stretching effect will cause it to hit everything between it and Ness.
Trivia
- In SSB, grabs are normal hitboxes with no apparent mechanism for distinction from attacks. In Melee, grab hitboxes and inert hitboxes are 0%-damage hitboxes with "grab" or "inert" for an effect. Both grabs and inert hitboxes are separate objects in Brawl and SSB4, though in rare cases a 0%-damage hitbox is used as an inert one.
- The single largest hitbox in Melee can be found when Raikou is released from a Poké Ball.
- Because characters enter a recoil animation upon being hit, pausing the game during the freeze frames can make it appear as if the attack's hitboxes are misaligned or too large.
Gallery
The hitboxes of Kirby's forward tilt, with Kirby's collision boxes, in the original game.
Various hitboxes and hurtboxes in Melee.
An example of a hack used to show the hitboxes of Toon Link's Spin Attack in Brawl.
